Pet Paw Print Ink Pad Kit: Safe Keepsake Prints at Home
By PDSA Pet Store | Published: 2026-11-05
Category: 產品評論
Learn how to make a paw print keepsake at home with a non-toxic paw print ink pad kit. Step-by-step tips for clean, safe dog and cat prints.
Quick answer
Use a non-toxic paw print ink pad kit that presses ink onto paper without touching your pet's paw. The Pet Safe Non-toxic Paw Print Ink Pad Kit is a good starting point because it includes the ink pad, card, and instructions in one package.
Why a press pad beats loose ink for pet prints
Loose ink or paint can smear, drip, or get licked off before the print dries. A press pad keeps the ink contained and transfers the print to the paper underneath, so your pet's paw stays clean. That matters for cats especially, since they often dislike having their paws handled.
The trade-off is that press pads work best with a firm, even press. Very wriggly pets or thick fur between the toes can blur the print, so you may need a helper or a second attempt.
When to skip the ink pad
If your pet has a cut, rash, or sore paw, wait until it heals. Also skip ink entirely for pets that panic when their paws are held; a clay impression or a fur clipping may be kinder. The ink pad is a low-mess option, not a no-contact option, so your pet still needs to tolerate a brief paw press.
Step-by-step: making a clean paw print keepsake
- Choose the right size and set up: Pick the small size for cats and small dogs, or the large size for bigger dogs. Place the card on a flat, non-slip surface and keep the ink pad closed until your pet is calm. Check the ink area dimensions against your pet's paw before you start.
- Prepare your pet and the paper: Let your pet sniff the closed kit, then gently hold one paw. Have a helper ready if your pet pulls away. Open the ink pad and position the card so the print lands in the center. Do a dry run with the closed pad first to see how your pet reacts.
- Press the paw once, firmly and evenly: Press your pet's paw onto the ink area for about two seconds, then lift and press it onto the card in one smooth motion. Do not rock or slide the paw. One firm press beats several light ones; a second try can be made on a fresh area of the card.
- Lift straight up and check the print: Lift the paw straight up so the print stays sharp. If the print is faint, press a little firmer on a new spot rather than re-inking the same paw. Keep a spare card handy in case the first print smudges.
- Let it dry and label it: Leave the card flat to dry completely before framing or storing. Write your pet's name and the date on the back in pencil. Store the dried print away from damp and direct sunlight.
Product facts
- Pet Safe Non-toxic Paw Print Ink Pad Kit: The ink does not touch the pet's paw; it presses the print onto the paper beneath. You avoid cleaning ink off fur and reduce the risk of your pet licking it.
Pet Safe Non-toxic Paw Print Ink Pad Kit
